| Awọn nkan | Agbara |
| sọri ọkọ | Ipilẹ aluminiomu, Ejò Ipilẹ, Ipilẹ irin, awọn ohun elo amọ ni ipilẹ bàbà, Igbimọ Bade Apapo |
| ohun elo | Abele Aluminiomu, Ejò inu ile, aluminiomu lmported, lmported Ejò |
| dada itọju | HASL/ENIG/OSP/fadaka |
| Layer iroyin | ọkan-apa tejede ọkọ / ė-apa tejede ọkọ |
| maxi.board Iwon | 1200mm * 480mm |
| min.board Iwon | 5mm*5mm |
| kakiri iwọn / apsce | 0.1mm / 0.1mm |
| ija ati lilọ | <= 0.5% (sisanra:1.6mm, Igbimọ Iwọn: 300mm * 300mm) |
| sisanra ọkọ | 0.5mm-5.0mm |
| Ejò aṣiwère sisanra | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| V-CUT ìyí ifarada | CNC afisona: ± 0.1mm; Punch: ± 0.1mm |
| V-CUT ìforúkọsílẹ | ± 0.1mm |
| Iho odi Ejò sisanra | 20um-35um |
| Min ìforúkọsílẹ ti iho ipo (kapa pẹlu data CAD) | ± 3mil (± 0.076mm) |
| Min.punching iho | 1.0mm ni isalẹ, 1.0mm (Isanra igbimọ labẹ 1.0mm, 1.0mm) |
| Min.punching square Iho | 1.0mm ni isalẹ, 1.0mm * 1.0mm (Isanra igbimọ ni isalẹ 1.0mm, 1.0mm * 1.0mm) |
| Iforukọ ti tejede Circuit | ± 0.076mm |
| Min.drill iho opin | 0.6mm |
sisanra ti dada itọju | wura fifi: Ni 4um-6um, Au0.1um-0.5um ENIG: Ni 5um-6um, Au: 0.0254um-0.127um fadaka: Ag3um-8um HASL: 40um-100um |
| Ifarada ìyí V-CUT | ± 5 (Iwe-iwe) |
| V-CUT ọkọ sisanra | 0.6mm-4.0mm |
| Min.Lefend iwọn | 0.15mm |
| Min.Solder boju šiši | 0.35mm |